The 20-86 is an extremely small, high specification, IP67 rated pendant paging transmitter capable of transmitting text directly to pocket pagers. Ideally suited to retail assistance, rest/care home emergency applications or duress environments.
Pendant Transmitters
The 20-86 series is an extremely small, IP67 rated, high specification keyring or pendant POCSAG paging transmitter, available with 1 to 5 buttons as required. Powered by a standard CR2032 coin cell.
It is small, comfortable and discreet and can be hand-held, kept on a key ring, held in the pocket or worn on a lanyard around the neck.
A front panel LED is used to confirm a message is being sent and/or to indicate a flat battery.
The Salcom "Stuck Button" feature prevents the battery going flat if a button has been accidentally held on.
20-86's has a receiver which can be used, with appropriate transceivers, to provide visual message received acknowledgements.
The 20-86 range of products are POCSAG direct to pager transmitters, allowing low cost systems to be developed since intermediate receivers and transmitters are not required for short range applications.
20-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once operating frequency has been set the 20-86 messages can be changed using programming software with an optional programming lead.
Although the 20-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having proven to be effective in some cases between floors and across buildings.
Designed and manufactured by Salcom here in New Zealand, it is a leading robust, proven, reliable top of class multifunctional pendant transmitter.
- UHF operation
- Small, light & discrete
- Internal cell battery
- Individually programmable buttons
- Robust design for harsh environments and use
- Ideal for near distance paging, assistance, duress or operation of lights or doors etc.
- Capable of operating on existing in-house paging systems
- 1 or 5-button variants, each button individually configurable with its own 35-character message
- Simple Telemetry solution
- Dust and waterproof rated to IP67
Options | 20-86-0001: Single button 20-86-0015: Five buttons blue 20-86-0005: Five buttons black |
Frequency Range | 440-470MHz - UHF |
Frequency Selection | Via software |
Power Supply | 3V, CR2032 button cell |
Battery Life | Approx 5,000 transmissions Approx 5 years standby |
Battery Replacement | Battery door on rear case |
Power Consumption | Standby: <0.5μA Transmit: 26mA |
Transmit Power | 10mW |
Channel Spacing | 25kHz,12.5kHz, 6.25kHz |
Modulation | FSK with NRZ data |
Deviation | ±4.5kHz, ±2.3kHz, ±1.0kHz |
Transmit Duty Cycle | Up to 20%; Maximum 30 seconds on time |
Baud Rate | 512, 1200, or 2400 |
Configuration Application | Sacoto (Salcom Configuration Tool software) |
Message Format | POCSAG; Alphanumeric or Numeric |
Programming Cable | 20-51-0001 (USB) |
Serial Port | 9600, N, 8, 1; 3V TTL (accessible only when case open for programming) |
Antenna | Internal aerial |
Indicators | Red LED (centre): Solid = Transmitting, Rapid flashing = Low battery Green LED’s (left and right): On = Received message or command |
Environmental Protection | IP67 |
Operating Temperature | -10ºC to +55ºC (+14ºF to +131ºF) |
Weight | 30g with battery |
Enclosure Dimensions | 72mm x 43mm x 15mm (L x W x H) |
Enclosure Material | ABS Plastic |
Case Flame Rating | UL94-HB |
Screws | PH-00 driver |
Screw Torque | 0.06 - 0.08N*m |
Type Approvals | CE, FCC and AS/NZS Pending |
-
Information
The 20-86 series is an extremely small, IP67 rated, high specification keyring or pendant POCSAG paging transmitter, available with 1 to 5 buttons as required. Powered by a standard CR2032 coin cell.
It is small, comfortable and discreet and can be hand-held, kept on a key ring, held in the pocket or worn on a lanyard around the neck.
A front panel LED is used to confirm a message is being sent and/or to indicate a flat battery.
The Salcom "Stuck Button" feature prevents the battery going flat if a button has been accidentally held on.
20-86's has a receiver which can be used, with appropriate transceivers, to provide visual message received acknowledgements.
The 20-86 range of products are POCSAG direct to pager transmitters, allowing low cost systems to be developed since intermediate receivers and transmitters are not required for short range applications.
20-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once operating frequency has been set the 20-86 messages can be changed using programming software with an optional programming lead.
Although the 20-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having proven to be effective in some cases between floors and across buildings.
Designed and manufactured by Salcom here in New Zealand, it is a leading robust, proven, reliable top of class multifunctional pendant transmitter.
-
Details
- UHF operation
- Small, light & discrete
- Internal cell battery
- Individually programmable buttons
- Robust design for harsh environments and use
- Ideal for near distance paging, assistance, duress or operation of lights or doors etc.
- Capable of operating on existing in-house paging systems
- 1 or 5-button variants, each button individually configurable with its own 35-character message
- Simple Telemetry solution
- Dust and waterproof rated to IP67
-
Specifications
Specifications
Options 20-86-0001: Single button
20-86-0015: Five buttons blue
20-86-0005: Five buttons blackFrequency Range 440-470MHz - UHF Frequency Selection Via software Power Supply 3V, CR2032 button cell Battery Life Approx 5,000 transmissions
Approx 5 years standbyBattery Replacement Battery door on rear case Power Consumption Standby: <0.5μA
Transmit: 26mATransmit Power 10mW Channel Spacing 25kHz,12.5kHz, 6.25kHz Modulation FSK with NRZ data Deviation ±4.5kHz, ±2.3kHz, ±1.0kHz Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time Baud Rate 512, 1200, or 2400 Configuration Application Sacoto (Salcom Configuration Tool software) Message Format POCSAG; Alphanumeric or Numeric Programming Cable 20-51-0001 (USB)
Serial Port 9600, N, 8, 1; 3V TTL (accessible only when case open for
programming)Antenna Internal aerial Indicators Red LED (centre): Solid = Transmitting, Rapid flashing = Low battery
Green LED’s (left and right): On = Received message or commandEnvironmental Protection IP67 Operating Temperature -10ºC to +55ºC (+14ºF to +131ºF) Weight 30g with battery Enclosure Dimensions 72mm x 43mm x 15mm (L x W x H) Enclosure Material ABS Plastic Case Flame Rating UL94-HB Screws PH-00 driver Screw Torque 0.06 - 0.08N*m Type Approvals CE, FCC and AS/NZS Pending
- Manuals & Downloads